Fluid & Pumps
Pumps, piping, head, flow, pressure drop and fluid-system calculations.
Engineering Tools Made Simple
Practical Engineering Calculators for Real Technical Work
Fast, transparent, and reliable calculations for fluid systems, steam, HVAC, electrical, and mechanical applications. Built for engineers, technicians, and technical professionals.
Pump Head Calculator
150
GPM
82.4
ft
Water (60°F)
Required Pump Head
82.4 ft
System Curve
Formula
H = Hₛ + Hₚ + Hf + Δz
Where:
H = Total Dynamic Head
Hf = Friction & fitting losses
Δz = Elevation difference
Boiler & Steam
Steam properties, boiler performance, feedwater and efficiency calculations.
HVAC & Airflow
Airflow, duct sizing, heating, cooling and ventilation calculations.
Electrical & Mechanical
Electrical systems, motors, power, voltage, current and mechanical calculations.
Popular Calculators
View all calculators →Pump Head Calculator
Calculate pump head from pressure, flow, hydraulic power and fluid properties.
Pipe Flow Calculator
Calculate pipe flow, velocity and hydraulic relationships from known system data.
Pressure Drop Calculator
Estimate friction loss and pressure drop through pipes and fittings.
Boiler Efficiency Calculator
Estimate boiler efficiency using direct or indirect calculation methods.
Steam Enthalpy Calculator
Calculate steam enthalpy, quality and thermodynamic properties.
CFM Calculator
Calculate airflow in cubic feet per minute for HVAC and ventilation systems.
Voltage Drop Calculator
Calculate voltage drop in DC, single-phase and three-phase circuits.
Motor Power Calculator
Calculate motor power from torque, RPM, voltage, current and efficiency.
Why Engineers Use EngiBench
Transparent Formulas
Every calculator shows the formula and variables used so you can understand and verify the calculation.
Unit Conversions
Built-in unit conversions help you work across SI and US engineering systems with confidence.
Calculation Breakdowns
Step-by-step breakdowns make it easier to review inputs, formulas, conversions and final results.
Reference-Aware Tools
Engineering references and authoritative sources are included where they help explain the calculation basis.
Frequently Asked Questions
Learn more about EngiBench calculators, calculation methods, engineering references and how to use the tools effectively.
What is EngiBench?
EngiBench is an engineering calculator platform designed for practical technical calculations across fluid systems, pumps, boilers, steam, HVAC, electrical engineering and mechanical engineering. The tools are built to help engineers, technicians and students perform common calculations more efficiently.
Are EngiBench engineering calculators free to use?
EngiBench provides its online engineering calculators for users to access directly through the website. You can browse the available tools from the All Calculators page and select the calculator that matches your engineering task.
How accurate are EngiBench calculators?
Calculator accuracy depends on the engineering equation, input values, units, assumptions and operating conditions. EngiBench tools are designed to make the calculation basis transparent, but users should verify project-critical results against applicable standards, manufacturer data and qualified engineering review.
Do the calculators show the formulas used?
EngiBench calculators are designed to show the engineering relationship behind the result. Many tools include formulas, variables, unit information and calculation breakdowns so users can understand how the result was obtained instead of receiving only a final number.
Can I use EngiBench for professional engineering work?
EngiBench can be useful for preliminary calculations, cross-checking, troubleshooting, education and technical estimation. It does not replace project-specific engineering design, applicable codes and standards, manufacturer data, field measurements or professional engineering approval where those are required.
What engineering disciplines does EngiBench cover?
The calculator library includes tools for fluid mechanics, pumps, piping, boiler and steam systems, HVAC and airflow, electrical power, motors and other mechanical calculations. Additional engineering calculators can be added as the platform continues to expand.
Do EngiBench calculators support different units?
Many EngiBench tools support common SI and US engineering units. Where unit selectors are available, values are converted while preserving the underlying physical quantity, helping users work with units such as kPa, psi, metres, feet, kW, horsepower, GPM and m³/h.
Where do the engineering formulas and reference data come from?
Where relevant, EngiBench pages reference engineering equations, government publications, regulatory information, technical references and other authoritative sources. Individual calculator pages may also explain assumptions and limitations associated with the calculation method.
Can I suggest a new engineering calculator?
Yes. Suggestions for useful engineering calculators are welcome. If you have a calculation that would be valuable to engineers or technicians, you can send the calculation goal, typical inputs, outputs and relevant formula through the Contact page.
What should I do if I find a possible calculation error?
If a result appears incorrect, first check the input values, units and calculation mode. If the issue remains, contact EngiBench with the calculator URL, inputs, displayed result and the formula or reference used for comparison so the calculation can be reviewed.
Ready to get started?
Explore our full collection of engineering calculators and make your next calculation easier.